(with two-channel amplifier)
Park Audio™
DELTA4215
2-way Loudspeaker
Application:
PA systems for clubs, bars, restaurants, music bands, indoor and outdoor usage.Versions:
- passive — DELTA4215,
- active — DELTA4215-P,
- active with two-channel amplifier (for stereo loudspeaker set, composed of active and passive loudspeakers)::
— DELTA4215-PS (with line input),
— DELTA4215-PSE (with minimixer),
— DELTA4215-PSfx (with minimixer and effect processor).
VERSION:
Other Full Range Loudspeakers:
Loudspeaker:
- Frequency range 45 Hz – 19 kHz
- 15”, 500 W LF driver (EMINENCE) with 2.5” voice coil
- 1”, 60 W HF driver (B&C SPEAKERS) with 1.7” voce coil
- Maximum peak SPL 121.5 dB
- Coverage 90°H x 40°V
- Acoustic design – bass reflex
- Cabinet material – birch plywood, black water-polymer finish
- Version: cabinet material – chipboard, carpet finish
- Protective steel grid with powder coating
- Transpanent foam, glued to the inner surface of the grid
- Flange for speaker stand
- 5 mounting holes M10
Built-in amplifier:
- Power Rating – 2 x 350 W RMS (D class)
- Switching power supply
- Power Factor Corrector (option)
- Forced cooling system
- Detachable power cord
- Analog input circuit, acting as crossover, EQ, limiting and speaker overload protection
- Amplifier overload, short-circuit, thermal, high frequency and DC output protection
- Cutoff high pass filter
- Soft Signal Start
- Input level control
- Inputs / Line Outputs (through) – 2 х XLR / 2 х XLR
- Output for passive loudspeaker – SPEAKON
| MODEL | DELTA 4215-PS |
|---|---|
| Loudspeaker | |
| Power Handling (nominal) * | 500 W |
| Power Handling (continuous) ** | 1000 W |
| Maximum Output SPL (continuous) | 121.5 dB |
| Frequency Range (-10 dB) | 45 Hz - 19 kHz |
| Coverage | 90°H х 40°V (-6 dB) |
| Weight | 33 kg |
| Dimensions | 430/330 x 685 x 500, mm |
| Built-in Amplifier | |
| Power Rating (RMS) | 2 x 350 W, D class |
| Total Harmonic Distortion | 0.05% |
| Sensitivity | 0.775 V |
| Input Impedance | 10 kOhms (balanced) |
| Signal-to-Noise Ratio | 98 dB (unweighted) |
| HPF Cutoff Frequency | 45 Hz (24 dB/oct) |
| Power Requirements | ~230 V, 50/60 Hz |
* 2 hours test made with continuous pink noise signal (6 dB crest factor) within the range Fs-10Fs.
** Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
Empty tab. Edit page to add content here.