Park Audio™
2-way stage monitor DELTA5212
Application:
Stage monitor PA systems for insonifying the local areas, creating additional sound field for the singer orientation at the concerts and also using as a satellite in two-way PA systems.Versions:
- passive 8 Ohms
- active
Loudspeaker:
- Maximum output SPL 123 dB
- Frequency range 65 Hz — 20 kHz
- 12”, 400 W LF driver (EMINENCE)
- 1” HF driver (B&C SPEAKERS)
- Coverage 90°H x 60°V
- Acoustic design – bass reflex
- Cabinet material – birch plywood, black water-polymer finish
- Protective steel grid with powder coating
- Transpanent foam, glued to the inner surface of the grid
- Flange for speaker stand
- Can be used as a satellite in subwoofer-satellite PA systems.
Built-in amplifier:
- Power rating – 400 W RMS (D class)
- Switching power supply
- Natural cooling system
- Detachable power cord
- Line input / Line output (THROUGH) — XLR / XLR
- Input level control
- Analog input circuit, acting as crossover, EQ, limiting and speaker overload protection
- Amplifier overload, short-circuit, thermal, high frequency and DC output protection
| MODEL | DELTA5212-P |
|---|---|
| Loudspeaker | |
| Configuration | Active two-way stage monitor |
| Acoustic design | Bass reflex |
| LF driver | 12"dia EMINENCE, voice coil 2,5" |
| HF driver | 1"dia B&C SPEAKERS, voice coil 1" |
| Power Handling (nominal) * | 400 W |
| Power Handling (continuous) ** | 800 W |
| Frequency Range | 65 Hz – 18 kHz |
| Coverage | 90°H x 60°V |
| Maximum Output SPL (full space) *** | 123 dB / 1m |
| Weight | 17 kg |
| Dimensions: | |
| – widht | 522 mm |
| – height | 312 mm |
| – depth | 420 mm |
| Built-in amplifier | |
| Power Rating (RMS) | 400 W, D class |
| Sensitivity | 775 mV |
| Input Impedance | 10 kOhms |
| Signal-to-Noise Ratio | 98 dB (unweighted) |
| Input / Line Output | XLR / XLR |
| Cooling System | Natural |
| Power Requirements | ~220 V, 50/60 Hz |
* 2 hours test made with continuous pink noise signal (6 dB crest factor) within the range Fs-10Fs.
** Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
*** Maximum output SPL indicated. For comparison purposes and in accordance with common industry practice, maximum SPL specifications are calculations based upon transducer sensitivity, amplifier output voltage and speaker impedance.
